Recently added

OPTIMISATION DE LA PUISSANCE D’UN GPV A L’AIDE DE LA METHODE DE ‘PERTURB & OBSERVE’

BELKAS, AYOUB; HAMOUR, ABD EL MOUMEN (blida 1, 2023)

The current-voltage characteristic of a PV module is subject to variations depending on climatic conditions, resulting in a nonconstant power output. This means that the power generated depends heavily on the conditions ...

Etude et conception d’un module de production Cyber-Physique Cas d’étude d’un robot cartésien

TAHI, Samy; LAROUCI, Billel (blida 1, 2023)

In this thesis, we focused on the study and design of a cyber-physical production module in accordance with the requirements of Industry 4.0. With our case study of a Cartesian robot we designed the cybernetic part ...

Automatisation et Supervision d’une Machine à Recette de lotion (fabrication de la lingette)

HAMOUCHE, IMAD EDDINE; HADJI, AYMEN (blida 1, 2023)

The objective of this thesis is to solve a major problem in the industry, specifically in the manufacturing process of wipes. We have attempted to provide a solution by using programmable controllers to automate the work ...

Automatisation et régulation de la gestion doseurs alimentation four du ciment avec utilisation de la logique floue

BAOUNI, RABAH; LASSACI, ABDELHAFID (blida 1, 2023)

This report was developed as part of the last year of the Master in Automatics Industrial and IT. This internship is carried out at the Société de Ciments de la Mitidja (SCMI). The first part of this work consists of ...

Optimisation de la puissance d‟un GPV à l‟aide de la logique floue

BENDAHIB, Romaissa (blida 1, 2023)

The output power of the photovoltaic generator (GPV) depends on several climatic factors, such as sunlight and temperature. However, real-time tracking of the maximum power point (MPP) is necessary to optimize the ...

Contribution à l’étude de dispatching économique de la puissance dans un réseau électrique

Zouak, Salim; Amalou, Nadhir (blida 1, 2023)

The development of computer software has contributed to the innovation of power systems to become smart grids. This development is necessarily linked to several concerns: energetic, economic, etc. The introduction of ...

Mobile Robot Using Multiple control approaches

Yous, Imene; Bouhedir, Abdellah (blida 1, 2023)

Le contrôle coopératif des systèmes mobiles multi-robots a considérablement augmenté ces dernières années, en raison de la large gamme d’applications. L’idée est que les véhicules autonomes qui collaborent peuvent ...

Improvement and development of a supervisor for a cartoning machine (SAIDAL)

NAHOUI, Ramzi Mountasser (blida 1, 2023)

Ce travail a été réalisé sur le site de production de SAIDAL à Médéa ; son objectif est d'étudier et d'améliorer le processus de mise en carton des médicaments à l'aide d'une machine d’encartonnement en développant un ...

Simulation et régulation de la température d'un réchauffeur atmosphérique au niveau de la raffinerie d'alger ( RA1G)

Bensalah, Amine; Takarli, Mohamed (blida 1, 2023)

Conception, implémentation et supervision IHM d’un régulateur de tension d’un alternateur d’une centrale électrique.

BLIDIA, Mehdi (blida 1, 2023)

The project carried out within the scope of this dissertation aims to conduct an in-depth study and implement a control software for voltage regulation of a permanent magnet synchronous machine operating as an alternator, ...

Automatisation et régulation d’un système d’extraction du calcaire sous PCS 7

RAMDANI AMAR, RAMDANI AMAR (blida 1, 2023)

This master’s thesis was developed as part of a project within the Cement Society of Mitidja de Meftah (SCMI). The objective of this project is to replace the S5 95U PLC using Siemens Simatic S5 software, which is currently ...

Study and Design of Automatic Installations for a Water Pumping Station

Belmahdi, Abdessalem; Belkacemi, Mohamed Ouassim (Blida1, 2023)

Study and Design of Automatic Installations for a Water Pumping Station

Belmahdi, Abdessalem; Belkacemi, Mohamed Ouassim (blida 1, 2023)

Notre mission dans ce projet d’ing´enierie est d’´etudier et de concevoir un syst`eme de contrˆole automatique pour une station de pompage d’eau qui fournit l’eau d’une vall´ee `a la station d’´epuration. L’´etude consiste ...

Study and Design of Automatic Installations for a Water Pumping Station

Belmahdi, Abdessalem; Belkacemi, Mohamed Ouassim (blida 1, 2023)

Notre mission dans ce projet d’ing´enierie est d’´etudier et de concevoir un syst`eme de contrˆole automatique pour une station de pompage d’eau qui fournit l’eau d’une vall´ee `a la station d’´epuration. L’´etude consiste ...

La commande directe du couple (DTC) de la machine synchrone à aimants permanents

METIDJI, MOHAMED AMINE; TIROUCHE, AYMENE (blida 1, 2023)

General overview of electrical machines and inverters. A study and modeling of the permanent magnet synchronous machine powered by alternating current through a three-phase voltage inverter is presented. A study and ...

Étude de la répartition optimale des puissances dans les réseaux de transport de d'énergie électrique pour un écoulement de puissance optimal

REMMIDE, Ali Abd errahmen; FERHAT, Mohamed Amine (blida 1, 2023)

The electrical network is a complex and interconnected system comprising transmission lines, substations, and transformers. Its purpose is to transport electricity from power plants to end users, such as households, ...

Prétraitement d’une Station d’Épuration des Eaux Usées

BENKESSIRAT, Elyes; BENDALI, BRAHAM Mouna (blida 1, 2023)

Our mission in this engineering project is to program the pre-treatment section of a wastewater treatment plant using a redundant programmable logic controller (PLC) (S7-1500 API) with a CPU (CPU 1513R-PN) and add an ...

Programmation et commande des axes d'une machine d’usinage utilisée pour la fabrication d'engrenages et de roues dentées

BENCHEIKH, MOHAMED IDRIS; HED, MESSAOUD HAMZA (blida 1, 2023)

Table des matières Mastering the programming and control of servo motors has become an urgent necessity for thedevelopment of the industrial sector. In this context, our work focuses on studying how to control and program ...

Identification paramétrique de la machine asynchrone par la méthode de colonie d’abeille artificielle

ZERMANE, Ali; BERANA, Ayoub (blida 1, 2023)

Bee colony optimization algorithms are increasingly being used for solving certain optimization problems. This study aims to implement an Artificial Bee Colony (ABC) algorithm for asynchronous machine identification and ...

L’Utilisation De L’IA Dans Un Système D’Emballage

HAMIDI, KHALED; SLIMANI, WISSAM YOUSRA (blida 1, 2023)

Human beings use their vision to analyze and control any information received from nature. With the great technological advance, computers are thus used to accomplish this task, and that in an automatic way and it is ...

Recently added

Département d’Automatique: Recent submissions

Chercher dans le dépôt

Parcourir

Tout DSpace

Cette communauté

Mon compte